Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
Carefully remove all pieces from carton and
make sure that you have all parts listed (refer
to parts list on page 2).
If you are missing parts, please call GHP
customer service at 1-877-447-4768.
1. Attach corner support (J) to base (B) with
bolt (AA) and washer (BB) through predrilled
holes as illustrated.
2. Attach left pilaster (E) to left side panel (C)
by securing from the back with washers (BB)
and bolts (AA) inserted through pre-drilled
holes as illustrated. Tighten with screwdriver.
Repeat using right pilaster (F) and right side
panel (D).
3. Set base (B) upright and insert 4 dowels
(CC) into pre-drilled holes in base (B). Slip
assembly over dowels in base (B). Make sure
assembly is snug, then secure with washers
(BB) and bolts (AA) inserted through pre-drilled
holes as illustrated. Tighten with screwdriver.
1
J
2
C
D
3
B
3
BB
B
BB
E
F
AA
BB
CC
AA
AA
Publicidad
Tabla de contenido
