Descargar Imprimir esta página

Important - Thrustmaster T.Flight Hotas 4 Manual Del Usuario

Ocultar thumbs Ver también para T.Flight Hotas 4:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 7
ENGLISH
— Tip (in PlayStation
regarding how to automatically program and combine the rotation axis of the T.Flight Hotas 4
joystick's handle on the rudder axis of the T.Flight Rudder Pedals.

IMPORTANT:

Requires updating the T.Flight Hotas 4 joystick's firmware to version V25 (or higher).
The firmware update procedure is available here:
http://ts.thrustmaster.com/download/pub/webupdate/tflighthotas/t.flighthotas4_firmware_update_procedure.pdf
This tip lets you use the T.Flight Rudder Pedals with the T.Flight Hotas 4 joystick in all PS4™ games
compatible with this joystick.
Procedure:
Connect the T.Flight Rudder Pedals to the T.Flight Hotas 4 joystick via the RJ12 connector located at
the back of the joystick.
Connect the T.Flight Hotas 4 joystick to the PlayStation
joystick to sign in to your account.
Start up the game.
To program and combine the rotation axis of the joystick's handle on the pedals' rudder axis:
1. Rotate the joystick's handle completely to the left (or completely to the right), and keep the handle
fully rotated.
2. Press and hold down the OPTIONS button on the joystick, without releasing the handle:
the PS LED blinks red twice.
3. Release the joystick's handle and the OPTIONS button.
The joystick handle's rotation axis is programmed and duplicated
To cancel the programming and uncombine the rotation axis of the joystick's handle on the pedals'
rudder axis:
Carry out the same procedure (i.e. fully rotate the joystick's handle, and press and hold down the
OPTIONS button):
the PS LED blinks red once.
The programming for the joystick handle's rotation axis is now canceled, and no longer duplicated on
the pedals' rudder axis (the default mode).
Please note:
This programming is not saved permanently: you must carry out this procedure each time you restart
the game.
This tip only works on PlayStation
On PC, it is also possible to duplicate these two axes via the joystick's control panel (when the joystick's
PC drivers are installed).
®
4 games not natively compatible with the T.Flight Rudder Pedals)
on the pedals' rudder axis.
®
4.
2
®
4 console, and press the PS button on the

Publicidad

loading

Este manual también es adecuado para:

Tfrp