10
www.electrolux.com
5.3 The heat setting
Touch
Touch
Touch
deactivate the cooking zone.
5.4 Activating and deactivating
the outer rings
You can adjust the surface you cook to
the dimension of the cookware.
Use sensor field:
To activate the outer ring: touch the
sensor field. The indicator comes on.
To activate more outer rings: touch the
same sensor field again. The subsequent
indicator comes on.
To deactivate the outer ring: touch the
sensor field until the indicator goes out.
When you activate the zone
but do not activate the outer
ring the light that comes out
from the zone may cover the
outer ring. It does not mean
that the outer ring is
activated. To see if the ring
is activated check the
indicator.
6. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
6.1 Cookware
The bottom of the cookware
must be as thick and flat as
possible.
Ensure pan bases are clean
and dry before placing on
the hob surface.
to increase the heat setting.
to decrease the heat setting.
and
at the same time to
5.5 Child Safety Device
This function prevents an accidental
operation of the hob.
To start the function: activate the hob
with
. Do not set any heat setting.
Touch
of the two front cooking zones
at the same time for 4 seconds.
comes on. Deactivate the hob with
To stop the function: activate the hob
with
. Do not set any heat setting.
Touch
of the two front cooking zones
at the same time for 4 seconds.
comes on. Deactivate the hob with
To suspend the function for only one
cooking session: activate the hob with
.
comes on. Touch
front cooking zones at the same time for
4 seconds. Set the heat setting in 10
seconds. You can operate the hob.
When you deactivate the hob with
function operates again.
Cookware made of
enamelled steel and with
aluminium or copper
bottoms can cause a colour
change on the glass-ceramic
surface.
6.2 Examples of cooking
applications
The data in the table is for
guidance only.
.
.
of the two
the