Peavey Butcher Manual De Instrucciones página 20

Footswitch
1
CHANNEL SWITCH
1
Toggles between the Clean channel and the Crunch channel.
EFFECTS LOOP ON/OFF SWITCH
2
Toggles the Effects Loop on or off. When the indicator light is lit, the Effects Loop is active.
CLEAN CHANNEL BOOST
3
Switches on the preamp boost on the Clean channel.
REMOTE CABLE JACK
4
Connect the included eight-pin cable to the amp's footswitch/MIDI input jack.
Note: You must use the included eight-pin cable, as it supplies the footswitchwith power. When using an external
MIDI source to control the amplifier, a five-pin MIDI cable can be used. Since the Butcher uses MIDI control,
changes made to switches on the amplifier will be reflected by the LED's on the footswitch, and vice versa.
CRUNCH CHANNEL BOOST
5
Switches on the preamp boost on the Crunch channel.
MASTER VOLUME SELECT SWITCH
6
Toggles between the Two Master Volume controls.
2 3
20
4 5
6