EdilKamin INPELLET 49 Instalación Uso Y Mantenimiento página 33

Ocultar thumbs Ver también para INPELLET 49:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 59
INSTRUCTIONS FOR USE
This standard indicates the control operations to be carried out in situ, aimed at ascertaining correct system function.
Before igniting.
1st ignition: contact your local Dealer, who will calibrate the insert based on and in compliance with installation conditions.
They will calibrate the insert according to the type of pellets available and the conditions of use.
Before igniting, check:
Filling the cochlea.
operation to empty the combustion pot before turning.
It is quite normal for some pellets to remain, that the cochlea cannot suction.
Automatic igniting.
Ignition is not at a preset time, however: its duration is automatically shortened if the board reports that certain tests have
Manual igniting.
Insert a piece of lit Diavolina into the combustion chamber, close the door and press
the remote control.
Turning off
The turn-off phase involves:
Never pull the plug out whilst the device is still in the process of turning off.
OPERATIONS THAT CAN ONLY BE CARRIED OUT BY REMOTE CONTROL
Clock regulation
- 33
-

Publicidad

Tabla de contenido
loading

Tabla de contenido