Cleaning And Care - Klarstein JAM SESSION Manual De Instrucciones

CAUTION
Risk of burns! In order to reduce the risk of serious burns, exercise
extreme caution when handling the appliance parts even after
switching off. As with any cooking appliance, metal parts, glass
surfaces and even certain plastic parts can become very hot. Oven
mitts should be used when handling the appliance immediately after or
during use.
9. If necessary, skim foam from top of jelly. Never attempt to pour jelly from the pot
into another container. Always use a non-metal spoon or ladle (such as wood,
bamboo, plastic or silicone) to remove the jam from the pot.
10. Wait 30 minutes before making a new portion of jam or jelly with the appliance.
NOTE: If a mistake is made in programming or if you need to stop the entire jelly
process, pressing the cancel button (1) allows you to clear the recipe program and to
restart from "00".
Cooling time
• The appliance is programmed to cool for 30 minutes between boils. The display will
show "CO" when in the cooling mode and the appliance is not ready to produce
a new portion of jam or jelly. When the display „--" appears on the screen a new
cooking process can be started.

CLEANING AND CARE

Note: It is recommended that you clean the appliance in between uses.
• For the care of the parts of the appliance we recommend cleaning by hand with
warm soapy water. Do not use abrasive cleaners.
• Do not immerse the underside of the pot in liquid.
CAUTION
Risk of burns! As with any cooking appliance, metal parts and even
some plastic parts can become extremely hot. Always let the appliance
completely cool down before cleaning – usually it takes 20-30 minutes.
• Always turn your jam and jelly maker off by pressing the cancel button (1),
unplugging the mains plug from the socket and allowing the appliance to cool
down completely before cleaning
• The glass lid, stirrer and pot can all be washed in the dishwasher or with hot soapy
water.
EN
23