Tools And Materials Required; Ordering Information - Kohler MEMOIRS K-2269-1 Instrucciones De Instalación

TOOLS AND MATERIALS REQUIRED

S
Safety shoes and glasses
S
Level
S
Scissors
S
Masking tape
S
Soft lead pencil
S
Adjustable wrenches
S
Drill and drill bits
S
Paper toweling
S
Screwdriver
2. INSTALLATION
Uncrate the lavatory, and inspect for damage. To prevent damage,
return the lavatory to its original packing carton until ready for
installation.
Shut off the main water supply.
Rough-in the hot and cold water supplies and drain piping.
For Kohler's recommended lavatory height of 33-3/4" (85.7cm), the
centerline of the wall bracing must be 30-1/16" (76.4cm) from the
finished floor. For height variances, adjust the wall bracing and
centerline height accordingly.
Install sufficient bracing between the studs for securing the lavatory
to the wall.
NOTE: This lavatory is intended for installation into a custom
cabinet. Due to the special nature of this installation, Kohler
Company recommends that an experienced cabinet maker build
the new cabinet or modify an existing cabinet for the lavatory.
NOTE: To ensure proper lavatory fit in the cabinet, Kohler
recommends that you provide the cabinet maker with the actual
lavatory to be installed.
NOTE: Be aware of water supply and drain piping clearances
when including shelving or drawers in the cabinet.
Refer to Fig. #3 for the recommended cabinet dimensions.
A
1007273-2-

ORDERING INFORMATION

Single-Hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8" (20,3cm) Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Finished
Wall
Stud
Wall Bracing
29-3/4"
(75.6cm) min.
*Recommended overall height with lavatory installed.
Height may be adjusted to accommodate various applications.
2
K-2269-1
K-2269-8
Mounting Slots
Centerline
30-1/16" (76.4cm)
From Finished
Floor
Fig. #2
21" (53.3cm) min.
29-3/8" (74.6cm)
Fig. #3
Kohler Co., Kohler, WI U.S.A.
*33-3/4"
(85.7cm)