Work Light - Felisatti RS135/18L Manual De Instrucciones Original

3. Removing battery
1) Removing battery on power tool
To remove the battery, press the battery
button and pull the battery out of the
power tool toward the rear.
2) Removing battery on charger
To remove the battery, press the battery
button and pull the battery out of the
chargerl toward the rear.
Do not exert any force.
4. Charge state of the battery
The charge state can be checked on
the LED by pressing the charge state
indicator button
1 = Battery 70 - 100% charged
2 = Battery 30 - 69% charged
3 = Battery less than 30% charged
4 = Battery flat of defective

5. Work light

1) It is convenient if you use lighting
function when working in a dark place.
2) Press the light button with arrow mark
to turn the light on and press the
work light button again to turn it off.
Work light will be automatically turned off 10 minutes after it has been
turned on.
Light
15