Würth 1952 006 650 Traducción Del Manual De Instrucciones De Servicio Original página 17

ASSEMBLY EXAMPLES
Model 1
• Press frame with open lower support and insertion ring.
• Max load: 12 tons.
• The insertion ring is required to be able to use different types of
commercial pressers.
• Since the open area is extremely narrow, this allows you to use
narrow components.
Model 2
• Press frame with closed support and short TR20 screw.
• Max load: 17 tons.
• Extremely stable solution for high forces.
• The short TR20 thrust screw ensures a safe and central support
both for the Würth adapters system and the set of commercial
pressers.
Model 3
• Press frame with closed support and with extension columns.
• Working height extension from 290 to 415 mm.
• For mounting and removing extra-long bearings, silent blocks,
bushings, sockets, etc.
Model 4
• Press frame with closed support and long TR20 screw.
• The press frame can be operated both from below and above.
• If used in combination with a hydraulic cylinder, work can be
completed by acting directly on the lower thrust screw, without
having to use the hydraulic unit (threaded bushing supplied with
hydraulic cylinder).
1
3
2
4
17