auna Duke DAB Manual De Instrucciones página 22

EN
22
reception of different area and countries.
Auto preset FM radio stations
1. During FM radio mode, press the scan button, the unit will automaticlly
scan the radio frequency. When the clear signal is found, it will
automatically store the radio station, starting from program number 1
(p1).
2. Auto scanning in process, LCD display is showing "auto-scanning".
When it is completed, LCD shows "auto end"
3. Press preset up or preset down to choose the preset radio stations.
4. The number of stations can be found and stored is depended on the
reception of different area and countries.
FM radio stations information
During FM radio mode, press the info button repeateadly, LCD will show the
FM radio stations information (if available), including "radio text", "program
type", "frequency", "stereo/mono", "time", "date".
FM radio stations menu
During FM radio mode, press and hold the menu button, then press tuning
down or tuning up button repeatedly, LCD display will show:
Scan setting: press select button, then press tuning down or tuning up
button repeatedly to select "all stations" and "strong stations only". Press
select button to confirm. This is the setting for the sensitivity of auto-
scanning. The selected option will show "*" at the right side of LCD.
Audio setting: press select button, then press tuning down or tuning up
button repeatedly to select "stereo allowed" and "forced mono". Press
select button to confirm. The selected option will show "* at the right side
of LCD.
System: press select button, then press tuning down or tuning up button
repeatedly to select below. Press select button to confirm. The selected
option will show "*" at the right side of LCD.
• "Language" is the language select of the operation interface.
• "Factory reset" is the selection to back to the factory default setting
• "Sw version" for checking software version
• "Time" for setting time
• "Backlight" for setting backlight level
• On level: select from "high", "medium" and "low", then press select
button to confirm.
• Dim level: select from "high", "medium" and "low", then press select
button to confirm.