Cassette Functions - auna Duke DAB Manual De Instrucciones

"Recording" will be available on the LCD display during encoding.
4. To finish encoding, press REC button and LCD display will show "play
recording". The recorded track will be played just after recording
finished, then will show "end recording" and return to "DAB" mode.
Remark:-
• The recording speed is 1:1 and according to the actual playing time of
FM or FM-ST radio
• The recording format is preset at – mp3 bit rate : 128 kbps
• During DAB radio encoding, radio frequency is fixed and cannot be
tuned.

CASSETTE FUNCTIONS

Key functions
Stop / Eject: Press this button to stop the cassette. Press the button again
to open the cassette door.
Fast Forward: Press this button to fast forward.
Rewind: Press this button to fast rewind.
Playback: Press this button to play the cassette.
Pause: Press this button to stop playback temporarily. Press the button
again to resume playback.
Recording: Press this button together with the Play button to start
recording. You can record from Radio, BT, built-in microphone, USB and
SD to cassette.
•
Playing a Cassette
• Set the function switch to TAPE.
• Insert a cassette.
• Press the Play button on the tape deck to start playback.
• Use the Pause button to temporarily stop playback.
• To stop playback, press the Stop/Eject button.
Recording a Cassette
From Radio, BT, USB, SD:
• Set the function switch to the desired mode (Radio, BT, USB, SD).
• Press the [Play & Record] buttons simultaneously. The signal from the
desired mode is now recorded to tape.
From the built-in microphone:
EN
25