Listening To Dab Radio - auna Duke DAB Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Time out: select second from 10 > 20 > 30 > 45 > 60 > 90 > 120 > 180
FM radio encoding
1.
Press fun button repeatedly to select "FM" mode
2. Insert memory device (only desired device USB drive, SD or mmc card)
3. Press the REC button, it will take 3-5 seconds to read memory device.
"Recording" will be available on the LCD display durnig encoding.
4. To finish encoding, press REC button and LCD display will show "play
recording". The recorded track will be played just after recording
finished, then will show "end recording" and return to "FM" mode.
Hints for better reception
FM: the receiver has a built-in FM wire antenna hanging at the rear cabinet.
This wire should be totally unraveled and extended for best reception.

LISTENING TO DAB RADIO

1.
Press fun button repeatedly to select DAB mode, press scan button, unit
will scan DAB stations automatically.
2. Press info button repeatedly to check playing station data, including:
DLS (display will show "playing" if no DLS)
Signal strength
Program type (display will show "no pty" if it is not provided)
Ensemble name (station name)
Frequency and channel (eg. 5a 174.928 mHz)
Signal error
Birate and audio status (eg. 192kbps / DAB+)
Time (time from station)
Date (date from station)
3. Press tuning down or tuning up button repeatedly, LCD display will
show station name in short form. Press select button to confirm if
desired DAB statio is found. If select button is not pressed, unit will
automatically switch to the station after 3 seconds.
4. The number of stations can be found and stored is depended on the
reception of different area and countries.
5. Preset DAB stations: press and hold MEMbutton, display will show
"preset store", tuning down or tuning up button repeatedly to select
the program number for storage, then press select button to confirm
(display will show "empty" if the program number has not been stored
yet), display will show "stored". Press preset up and preset down button
to recall stored station.
EN
23

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

1003537410035375

Tabla de contenido