17. Slide programmable handset onto bracket and
snap into place. Insert handset cable into slot
marked "A1" on control box. (See Figure 16)
Figure 16
PAGE 6 OF 39
ASSEMBLY CONTINUED
18. Attach foot to adjustable height leg using four
M6 x 16 mm Allen bolts. Tighten using 5 mm Allen
wrench. Repeat with other foot and leg.
(See Figure 17)
Figure 17
19. Mount levelers for foot and turn clockwise by hand
to secure. (See Figure 18)
Figure 18
20. Desk is now fully assembled. Using two people,
carefully flip the desk upright onto its feet.
21. Plug power cord into outlet. Follow operation
instructions to initialize the desk prior to first use.
0920 IH-8184