Matrix CXC Manual Del Usuario página 9

POWER ACCURACY
This bike displays power on the console. The power accuracy of this model has been
tested using the test method of ISO 20957-10:2017 to ensure a power accuracy within a
tolerance of ±10 % for input power ≥50 W, and within a tolerance of ±5 W for input power
<50 W. The power accuracy was verified using the following conditions:
Nominal Power Rotations per minute measured at crank
•
50 W 50 RPM
•
100 W 50 RPM
•
150 W 60 RPM
•
200 W 60 RPM
• 300 W 70 RPM
•
400 W 70 RPM
In addition to the above testing conditions, the manufacturer tested the power accuracy
at one additional point, using a crank rotation speed of approximately 80 RPM (or higher)
and comparing the displayed power to the input (measured) power.
USING THE HEART RATE FUNCTION
The heart rate function on this product is not a medical device. The heart rate reading
is intended only as an exercise aid in determining heart rate trends in general. Please
consult your physician.
When used in conjunction with a wireless chest transmitter (sold separately), your heart
rate can be transmitted wirelessly to the unit and displayed on the console. Compatible
with Bluetooth, ANT+ and Polar 5kHz heart rate devices.
NOTE: The chest strap must be tight and properly placed to receive an accurate and
consistent readout. If the chest strap is too loose, or positioned improperly, you may
receive an erratic or inconsistent heart rate readout.
WARNING!
Heart rate monitoring systems may be inaccurate. Over exercising may result in serious
injury or death. If you feel faint, stop exercising immediately.
BATTERY
When the battery charge is low, a low battery icon will be displayed in the upper right
hand corner of the console.
The user will be prompted to pedal to charge (minimum of 60 RPMs). The battery icon will
disappear when charged.
If the battery needs to be replaced, the console will display this message when necessary.
CXM
9