Temperature Setting Buttons; Temperature Indicator; Temperature Regulation; Turbo Coolmatic Function - AEG SANTO 76308 KA Manual De Instrucciones

6
Control panel

Temperature setting buttons

The temperature is adjusted using the temperature setting buttons. These buttons are con-
nected to the temperature indicator.
• The temperature indicator is switched over from the indicator of the ACTUAL tempera-
ture (Temperature indicator is illuminated) to the indicator of the DESIRED tempera-
ture (Temperature indicator flashes) by pressing one of the Temperature setting buttons.
• Each time one of the two buttons is pressed again the DESIRED temperature is adjus-
ted by 1°C. The DESIRED temperature must be reached within 24 hours.
If neither button is pressed, the temperature indicator automatically switches back after
a short period (approx. 5 sec.) to the indicator of the ACTUAL temperature.
DESIRED temperature means:
The temperature that has been selected for inside the fridge. The DESIRED temperature is
indicated by flashing numbers.
ACTUAL temperature means:
The temperature indicator shows the current temperature inside the fridge. The ACTUAL
temperature is indicated with illuminated numbers.

Temperature indicator

The temperature indicator shows several information:
• During normal operation, the temperature currently present in the fridge (ACTUAL tem-
perature) is displayed.
• When the temperature is being adjusted a flashing display indicates the fridge temper-
ature currently set (DESIRED temperature).
When changing the temperature setting wait about 24 hours until the temperature dis-
play has stabilised.

Temperature regulation

To operate the appliance, proceed as follows:
1. Set the required temperature by pressing the corresponding temperature regulator.
The temperature indicator will immediately show the changed setting (DESIRED tem-
perature) and the temperature indicator flashes.
2. Each time the temperature regulator is pressed the DESIRED temperature is adjusted
by 1 °C. The DESIRED temperature must be reached within 24 hours.
3. Once the required temperature has been set, after a short period (approx. 5 sec.) the
temperature indicator will show again the current ACTUAL temperature inside the cor-
responding compartment. The temperature indicator will change from flashing to con-
tinuous illumination.
For a correct storage of the food the following temperature should be set:
• +5 °C in the fridge
When the setting is changed, the compressor does not start immediately if automatic
defrosting is currently taking place. As the storage temperature within the fridge is
reached quickly you can store food immediately after switching on.

TURBO COOLMATIC function

The TURBO COOLMATIC function is suited for quick cooling of large quantities of goods
in the refrigerator.