Maintenance; Side Brushes; Side Wheels And Castor - Amibot vision Manual De Instrucciones

EN

Maintenance

Side brushes

NOTE: Side brushes must be replaced if you notice that their original shape has
changed.

Side wheels and castor

Wipe the side wheels with a dry cloth to remove built up dust.
Use a slotted screwdriver to remove the castor from its frame and
wipe it clean. Remove the hair and other debris caught around the
axle.
Unclip the side brushes by gently pulling them
upwards and rinse them under clean water. Wait
until they are completely dry before reusing
them. Check that the left brush is marked with
an "L" and the right brush is marked with an "R".
The engraved letters on the side brushes and the
robot are there to guide you.
R
24