Amibot vision Manual De Instrucciones página 34

EN
Troubleshooting
No. Problem
The robot
does not
01
charge any
more.
Home base
02
failed.
The robot
03
has frozen.
The robot
returns to
the home
04 base before
the end of
the cleaning
cycle.
Cause
1. The robot is
not correctly
positioned
on the home
base or it is
not plugged in
correctly.
2. The robot is not
switched on.
3. Dust on the
sensors
1. The home base's
position is
incorrect.
1. The robot is stuck
in the cables.
1. The battery
level is weak.
It charges
automatically.
32
Solution
1. Correctly reposition the
robot and place its power
sensors on the home base
sensors.
2. Switch the robot on by
pressing the ON/OFF power
button.
3. Clean the sensors with a soft
cloth.
1. Plug the home base in,
position the home base
between several rooms,
remove any obstacles within
a radius of 1 metre to the
left and right and 2 metres in
front of the home base.
1. Remove the cables and any
possible obstacles for a
better performance.
1. The robot automatically
resumes cleaning once
charged.