Amibot vision Manual De Instrucciones página 32

EN
Troubleshooting
"Charging problem"
"Main brush get
tangle. Please clean
main brush."
"Right wheel
jammed. Please
clean right wheel."
"Side brush
jammed. Please
clean side brush."
"Bumper sensors
has been blocked."
"Cliff detect sensor
has been blocked."
"Vacuum motor
jammed. Please
clean it."
"Start cleaning."
"Complete
cleaning."
"Wi-Fi Reset."
The robot cannot charge. Check the connection between
the robot and the home base contacts. Remove dust from
the contacts or plug the robot directly into the adapter.
The main brush is jammed. Check the central brush and
remove dust or objects likely to be jamming it and restart
the robot.
Problem with the right wheel. Check the right wheel and
remove anything likely to be jamming it and restart the
robot.
Problem with side brushes. Check them and remove the
dust or anything else likely to be jamming it and restart the
robot.
The front bumper is blocked. Check the front bumper and
gently tap it to loosen it and restart the robot.
The gap sensors are dirty. Clean them using a soft cloth
and restart the robot.
The vacuum motor is jammed. Check if the dustbin is
properly attached.
AUTO cleaning.
End of cleaning cycle.
Reset Wi-Fi audio message.
30