Cleaning Modes - Amibot vision Manual De Instrucciones

Operation

Cleaning modes

Three (3) cleaning modes are available on the mobile app for optimal
cleaning.
• Automatic mode: after scanning the room, the robot cleans the
room using an optimised route. It divides the room into areas in
a zig-zag fashion to vacuum any debris and dust.
• Wall mode: ideal for cleaning along walls and in corners. The
robot moves in straight lines along walls and furniture in the
room. When the robot has cleaned along all the structures in the
room, it automatically returns to its home base.
• SPOT mode: This mode is the most effective when cleaning a
particularly dirty area. With the SPOT mode, the robot will move
in a spiral to concentrate vacuuming over the required area. At
the same time, it activates its MAX vacuum power to vacuum the
dust from the floor more easily.
• MANUAL mode: With this mode, you can guide the robot using
the directional arrows.
• Back to home base: You can decide when to end the cleaning
cycle by pressing this button. Your robot will make its way to its
charging station.
13
EN