Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch Professional GSB 19-2 RE Manual Original

OBJ_BUCH-824-004.book Page 13 Wednesday, April 27, 2011 10:54 AM
Use appropriate detectors to determine if utility lines
are hidden in the work area or call the local utility com-
pany for assistance. Contact with electric lines can lead
to fire and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property dam-
age.
When working with the machine, always hold it firmly
with both hands and provide for a secure stance. The
power tool is guided more secure with both hands.
Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.

Technical Data

Impact Drill
Article number
Rated power input
Output power
No-load speed
– 1st gear
– 2nd gear
Rated speed
– 1st gear
– 2nd gear
Impact frequency at no-load
Rated torque (1st/2nd gear)
Speed preselection
Right/left rotation
Key type drill chuck
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
Bosch Power Tools
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.

Intended Use

The machine is intended for impact drilling in brick, concrete
and stone as well as for drilling in wood, metal and plastic. Ma-
chines with electronic control and right/left rotation are also
suitable for screwdriving and thread-cutting.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Keyless chuck
2 "Drilling/Impact Drilling" selector switch
3 Rotational direction switch
4 Lock-on button for On/Off switch
5 Thumbwheel for speed preselection
6 On/Off switch
7 Gear selector
8 Auxiliary handle (insulated gripping surface)*
9 Depth stop*
10 Handle (insulated gripping surface)
11 Front sleeve*
12 Rear sleeve*
13 Chuck key*
14 Key type drill chuck*
15 Screwdriver bit*
16 Universal bit holder*
17 Allen key *
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GSB 19-2 RE GSB 19-2 RE
Professional Professional
3 601 A7B 5.. 3 601 A7B 6..
W 850
W 430
-1
min 0 – 1000
-1
min 0 – 3000
-1
min 800
-1
min 2060
-1
min 51000
Nm 5.2/2.0
–
English | 13
GSB 780
Professional
3 601 A7B 1..
850 780
430 390
0 – 1000 0 – 1000
0 – 3000 0 – 3000
800 850
2060 2170
51000 51000
5.2/2.0 4.1/1.6
–
1 619 929 J12 | (27.4.11)