Samson Concept 88 Manual De Proprietário página 14

7. Install batteries
Quick Start - Single System Setup
With the transmitter powered off, install two fresh AA batteries into the CB88 belt
pack or CH88 handheld transmitter. Leave the battery compartment open.
8. Press button on transmitter to turn on 9. Press and
7. Install batteries
Turn on the power to the transmitter by pressing and holding Power switch; the indi-
7. Install batteries 8. Press button on transmitter to turn on
cator LED will light green.
8. Turn on belt pack transmitter
8. Press button on transmitter to turn on 7. Install batteries 9. Press and hold SELECT button to 8. Turn on belt pack tran
14