Ingersoll Rand 93 Serie Especificaciones Del Producto página 5

Note: If the action of the tool becomes sluggish:
- Pour 3 cm of cleaning solution into air inlet and run tool for 30 seconds.
3
- Immediately after flushing the tool, pour 3 cm
30 seconds.
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
Original instructions are in English. Other languages are a translation of the original instructions.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
16574139_ed3
of oil into air inlet and run tool for
3
EN
EN-3