Philips NORELCO S9000 Serie Manual De Instrucciones página 21

'Unplug for use' symbol
Charging in the charging stand
2 Insert the small plug into the product and
put the power plug in the wall outlet.
- While the product is charging, an
animation appears on the display
showing the progress.
- When the product is fully charged, the
battery percentage shows 100 % and the
battery icon shows the battery being full.
3 After charging, remove the power plug from
the power outlet and pull the small plug out
of the product.
The 'unplug for use' symbol flashes to remind
you to disconnect the power cord from the
power outlet and remove the small plug from
the product before you switch it on.
1 Make sure that the product is switched off.
2 Put the small plug in the charging stand and
put the power cord in the power outlet.
3 Put the product in the charging stand.
Specific models only: The light ring on the
bottom of the charging stand lights up and
rotates quickly.
- After approximately 5 minutes, the light
ring rotates slower.
- As the product continues to charge, the
light ring becomes brighter and rotates
slower.
21
English