Specific Safety Rules - Black+Decker BDCMTS Manual De Instrucciones

SYMBOL SIGNAL MEANING
SAFETY ALERT SYMBOL:
May be used in conjunction with other symbols or pictographs.
DANGER:
Indicates hazardous situation which, if not avoided, will result in death or serious injury.
WARNING:
serious injury.
CAUTION:
Indicates a haz ard ous situation which, if not avoided, could result in minor or
mod er ate injury or property damage.
WARNING:
Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
WARNING:
Read all safety warnings and all instructions provided with
your Power Unit (BDCDMT112, BDCDMT120, or BDEDMT) before using
this attachment. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.

SPECIfIC SAfETy RUlES

WARNING:
AlWAyS use safety glasses. Everyday eye glasses are NOT safety
glasses. Also use face or dust mask if cutting operation is dusty. AlWAyS WEAR
CERTIfIED SAfETy EQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CPA Z94.3),
• ANSI S12.6 (S3.19) hearing protection,
• NOSH/OSHA respiratory protection.
• Sanding of lead-based paint is not recommended. See Sanding lead Based Paint for
additional information before sanding paint.
• Clean your tool out periodically.
WARNING:
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to the state of California to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well ventilated area, and work with approved safety
equipment, such as those dust masks that are specially designed to filter out microscopic particles.
• Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and
other construction activities. Wear protective clothing and wash exposed areas with
soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote
absorption of harmful chemicals.
SyMBOlS
The label on your tool may include the following symbols. The symbols and their definitions are as follows:
V ..................volts
Hz ................hertz
min ..............minutes
or DC ..direct current
................Class I Construction
(grounded)
................Class II Construction
(double insulated)
............Read instruction manual before use
................Use proper eye protection
Indicates hazardous situation which, if not avoided, could result in death or
DANGER, WARNING, OR CAUTION.
Indicates
A ...................amperes
W ..................watts
or AC .......alternating current
n o .................no load speed
..................earthing terminal
.................safety alert symbol
.../min or rpm...revolutions or
..................Use proper respiratory protection
..................Use proper hearing protection
2
reciprocation per minute