Safety Notes; Important Notes; Function - marklin 80 Serie Manual De Instrucciones

Ocultar thumbs Ver también para 80 Serie:
Tabla de contenido

Publicidad

2. Safety Notes

• This locomotive is to be used only with an operating system designed for it
(DC power = 18V±, Märklin AC, Märklin Digital,
Märklin Systems).
• Use only switched mode power supply units and transformers that are desi-
gned for your local power system.
• This locomotive must never be supplied with power from more than one trans-
former.
• Pay close attention to the safety notes in the instructions for your operating
system.
• The feeder track must be equipped to prevent interference with radio and te-
levision reception, when the locomotive is to be run in conventional operation.
The 104770 interference suppression set is to be used for this purpose.
• The wire used for feeder connections to the track may only be a maximum of 2
meters / 78 inches long.
• Do not expose the model to direct sunlight, extreme changes in temperature,
or high humidity.
• WARNING! Sharp edges and points required for operation.

3. Important Notes

• locomotive in this set is set for address 80 for operation with other controllers.
• The operating instructions are a component part of the product and must
therefore be kept as well as transferred along with the product to others.
• Maintenance, servicing, and repairs may only be done by adults.
• Please see your authorized Märklin dealer for repairs or spare parts.
• The warranty card included with this product specifies the warranty condi-
tions.
• Disposing: www.maerklin.com/en/imprint.html
4. Functions
• The mode of operation (AC/DC, Mfx, Märklin Motorola, or DCC) is recognized
automatically.
• Possible addresses:
1-80 (Control Unit 6021)
1-255 (Central Station 6021x)
01 – 9999 DCC
• Address set at the factory: (Märklin) 80 / (DCC) 03
• Mfx technology for the Mobile Station / Central Station.
Name set at the factory: 80 028
• Adjustable Acceleration delay (ABV).
• Adjustable Braking delay (ABV).
• Adjustable maximum speed.
• Setting locomotive parameters (address, acceleration/braking delay, maxi-
mum speed, etc.): with the Control Unit and DCC (CV programming), Mobile
Station, or the Central Station.
• Headlights, changing over with the direction of travel.
• The model is designed for operation on Märklin 1 Gauge track. As the consu-
mer you assume the risk for operating on other makes of track.
• Only the train control functions and headlight changeover feature are availa-
ble in analog operation.
6

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

55045

Tabla de contenido