Dometic GROUP WAECO WPS900F Manual Del Usuario página 38

Connecting the parking aid
The complete circuit diagram can be found in:
 fig. c for reversing signal via reverse gear
 fig. d for reversing signal via CAN bus
No. Description
1 Control electronics for rear sensors
2 Control electronics for front sensors
3 Black/blue cable: connection to the reversing light
4 Reversing light
5 Brown cable: Connection to earth
6 Black cable bridge (connected = front unit/disconnected = rear unit)
7 Rear sensors
8 Front sensors
9 Brown cable: connection to the negative battery terminal.
10 Black/blue cable: connection to the positive battery terminal.
11 Yellow/black wire (for the front system only): Connection to earth
Optional: connection to the speed signal from the speedometer
12 Black/blue cable: connection to connected positive (+12 V)
13 Black/red wire for the control unit: connection to the black/red wire of the external
button
14 External button
15 Black wire from the external button: connection to earth
16 Brown cable: connection to earth
17 Orange/brown wire: connection to CAN Low
18 Orange/green wire: connection to CAN High
19 Control unit
34
WPS900F/WPS910
EN