Publicidad
2. Fitting the Headset with flexible earhook
2.1
2.2
2.3
2.4
2.5
2.6
Note: The headset is confi gured from the factory for use with the right ear.
1)
4
Fitting to ear
2.1 Open hinged ear hook as
1)
wide as possible.
2.2 Place headset to the ear
so speaker fi ts comfortably and
microphone points toward the
mouth.
2.3 Close ear hook over the ear.
2.4 Bend or twist fl exible part of
the ear hook for fi ne adjustment.
Fitting to left ear
2.5 Pull ear hook hinge from the
slot and insert it on opposite
side of headset marked with L.
Perform steps 2.1 – 2.4 above.
Further adjustment
2.6 Ear hook hinge can be placed
in either of 2 slots, depending on
size of ear.
3. Setting up
3.1
3.2
3.3
Note: If your telephone also has a headset port, connecting the base unit directly to the telephone's head-
1)
set port will make it unnecessary to lift the telephone handset when making/answering calls. Simply press the
telephone's headset button instead of lifting/lowering the telephone handset.
3.1 Unplug handset cord from
your telephone and connect to
the port on base unit marked
with
.
3.2 Connect enclosed telephone
cord to the now empty handset
port on telephone, and to the
port on base unit marked with
1)
.
3.3 Connect AC power adapter to
port on bottom of base unit, then
connect to AC power source.
5
Publicidad
