Err7
Motor Error
Err8
Water exceeds protec ve level.
UNb
A er the last rinsing cycle finishes, spinning fails completely due to unbalance of the
laundry.
End
End of wash cycle.
¬Status informa on: Preset me for delayed opera on.
19:30
1:25
The remaining me is 1 hour 25 minutes.
Control panel lock func on: Press the "Delay" and the "Start/Pause" bu ons simultaneously
for 3 seconds a er star ng a program. It can no longer be changed by opera ng bu ons or
knobs. To unlock press the "Delay" and "Start/Pause" bu ons again for 3 seconds.
Power-off memory func on: In case of abrupt power failure or the need to cut off the power
during a program cycle, the present se ngs will be saved and the preset opera on will
resume when the power is on again.
To cancel a program. Press the "Start/Pause" bu on, then switch off the power and the
program is automa cally cancelled. Turn the program selector again to choose another
program.
During the spin process, if too much foam is inspected, in order to protect the motor, the
washing machine will eliminate the foam automa cally; the motor will stop and the drain
pump will drain the water con nuously for 90 seconds. If it happens more than 3 mes, the
motor will stop un l the end of cycle without spinning.
Contact the maintenance personnel.
Contact the maintenance personnel.
19