General Description - GYS Wattmatic 100 Traducción De Las Instrucciones Originales

Ocultar thumbs Ver también para Wattmatic 100:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
• If the internal fuse is blown, it must be replaced by the manufacturer,
its after-sales service or an equally qualified person.
• Regularly take off the cover and remove dust with an air gun. Take
the opportunity to have a qualified person check the electrical
connections with an insulated tool.
• Under no circumstances should solvents or other aggressive
cleaning agents be used.
• Clean the device's surfaces with a soft, dry cloth.
Regulations :
• The device complies with European Directive.
• The certificate of compliance is available on our website.
• EAC conformity mark (Eurasian Economic Commission)
Disposal:
• This product should be disposed of at an appropriate recycling
facility. Do not dispose of in domestic waste.
Product whose manufacturer is involved in the packaging's recy-
cling process by contributing to a global system of sorting, collec-
ting and recycling of households' packaging waste.
• Recyclable product that falls within waste sorting
recommendations (according to Decree n° 2014-1577).

GENERAL DESCRIPTION

Congratulations for the selection of this product, which has been designed with great care. To get
the best use of it, please read carefully the following instructions. Keep this instruction manual safe,
you may want to read it again later.
WATTMATIC is designed to charge starting liquid or gel electrolyte lead-acid batteries :
- from 15 Ah to 100 Ah in 6V or 12V for the WATTMATIC 100 (3 or 6 2V elements)
- from 20 Ah to 150 Ah in 6V or 12V for the WATTMATIC 140 (3 or 6 2V elements)
- from 25 Ah to 180 Ah in 6V or 12V for the WATTMATIC 170 (3 or 6 2V elements)
Load curve: WUoU. This curve ensures a 100% charge and maintains the level of charge thanks to
Floating.
CONNECTION IN CHARGER FUNCTION
Preliminary precautions
• For indoor use, with good ventilation.
• Remove the battery caps if there is, and check the level of liquid. If it is not correct; filled up with
distilled water. Clean well the battery terminals.
WATTMATIC 100.140.170
Translation of the original instructions
EN
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Wattmatic 140Wattmatic 170054530054493054509

Tabla de contenido