Troubleshooting; Technical Specifications - POLLOGEN Geneo Personal Manual Del Usuario

14

TROUBLESHOOTING

The device does not activate when the power button is pressed.
Battery is empty. Recharge the device.
Device does not charge while in cradle.
• Check if the charging cable is properly connected.
• Verify that the USB adaptor inserted properly into the wall socket.
• Verify that the power adaptor you are using has the correct power rating.
• Disconnect the cradle from the wall outlet and contact a service center.

TECHNICAL SPECIFICATIONS

This chapter presents the specifications for the Geneo Personal system.
TECHNICAL SPECIFICATIONS
SPECIFICATION VALUE
Weight Approximately 300 grams / 0.66 pounds
Overall Dimensions L=120 mm; W= 63 mm; H = 49.5 mm
L= 4.72, W=2.48, H =1.95 inches
Charger Rated Input 5V DC Min 0.55A
OPERATING CONDITIONS
CONDITION VALUE
Temperature 5°C–30°C / 41-86F
Humidity 20RH–80RH
TRANSPORT AND STORAGE
CONDITION VALUE
Temperature 0°C–40°C/ 32-104F
Humidity 10RH–00RH
15