Pattern Selector Dial; Stitch Length Dial; Stitch Width Dial - ALFA 2622 Manual De Instrucciones

C D E F G H
A A
1
2
1
3
I J K L
1
S.S.
12

Pattern Selector Dial

Raise the needle and presser foot. Turn the pattern selector
dial to set the symbol corresponding to the desired pattern at
the setting mark.
1 Setting mark

Stitch Length Dial

Turn the stitch length dial to set the desired stitch length at the
setting mark.
The higher the number, the longer the stitch length
Setting mark
1
" " is the recommended setting for buttonhole stitching.
Adjust the dial in the 0.5–4 range when you sew the zigzag
stitch.
Set the dial at "S.S." to sew the stretch stitch pattern.
If the stretch stitch pattern is not even, turn the stitch length
dial in the direction of "–" to compress it, or "+" to expand
it.

Stitch Width Dial

Turn the stitch width dial to set the desired stitch width at the
setting mark .
The higher the number, the wider the stitch width
1 Setting mark
Note :
Raise the needle above the fabric, when you turn the
stitch width dial.