Setting Spool Pins; Removing Or Inserting The Bobbin Case - ALFA 2622 Manual De Instrucciones

1
1
3

Setting Spool Pins

The spool pins are used for holding the spool of thread in order
to feed thread to the machine.
To use, pull up the spool pin. Push down for storage.
2
Note :

Removing or Inserting the Bobbin Case

Open the hook cover.
1
Raise the needle by turning the handwheel toward you.
Take out the bobbin case by holding the latch.
2
3
When inserting the bobbin case, place the horn into the recess
of the hook race.
7
1
Upper thread
2
Hole
3
Tangle
When using thread which has tendency to tangle
around spool pin, thread through the hole of spool
pin as shown.
The hole should face the thread spool.
1
Hook cover
2 Latch
3
Horn