Fit The Receiver Collar - Petsafe Wireless Pet Containment System Guía Para El Uso

Fit the Receiver Collar

Important: The proper fit and placement of your Receiver Collar
is important for effective training. The Contact Points must have
direct contact with your pet's skin on the underside of his neck.
To assure a proper fit, please follow these steps:
1. Make sure that the battery is not installed in the Receiver Collar.
2. Start with your pet standing comfortably.
3. To make it easier to hear the warning beep,
place the Receiver Collar on your pet with
the logo side of Receiver facing up.
4. Center the Contact Points underneath your
pet's neck, touching the skin. If your pet has
a long or thick coat, use the enclosed long
Contact Points to
reach through the hair.
Note: It is sometimes
necessary to trim
the hair around the
Contact Points to make
sure that contact is
consistent.
5. Check the tightness
of the Receiver
Collar by inserting
one finger between the end of a Contact Point and your pet's
neck. The fit should be snug but not constricting.
6. Allow your pet to wear the collar for several minutes then recheck
the fit. Check the fit again as your pet becomes more comfortable
with the Receiver Collar.
6 1-800-732-2677