Bowers & Wilkins FORMATION BASS Manual De Instrucciones página 6

The Bowers & Wilkins Home app Settings page is
opened by tapping on the settings icon. The initial
Settings menu lists each space and the number of
Formation devices present in each one.
Tapping on a space listed in the Settings menu
provides access to its Space and Formation device
settings. Tap the Space name to access the space
settings and tap the device name to access the
device settings. The device settings available will
depend on the device in question.
Note: If the Settings icon on the Bowers & Wilkins
Home app displays an amber dot (icon + dot)
this indicates that a Formation firmware update
is available. The firmware update process is
initiated from the Settings menu. You should
always aim to keep the Bowers & Wilkins Home
app and your Formation devices up to date with
the latest version and firmware. Not only will this
help ensure the most reliable performance, it
will ensure that you benefit from new Formation
features.
5. Cleaning
Should your Formation Bass need cleaning you
can wipe its top surface with a clean, lint-free cloth
and brush its grille with a soft brush. If you wish to
use any cleaning fluid, apply it onto the cleaning
cloth and not directly onto the Formation Bass.
Test a small area first, as some cleaning products
may damage some of the surfaces. Avoid products
that are abrasive, or contain acid, alkali or anti-
bacterial agents.
6. Support
Should you require further help or advice regarding
your Formation Bass please visit the Formation
support site here www.bowerswilkins.com/support.
Environmental Information
This product complies with international directives,
including but not limited to the Restriction of
Hazardous Substances (RoHS) in electrical and
electronic equipment, the Registration, Evaluation,
Authorisation and restriction of Chemicals (REACH)
and the disposal of Waste Electrical and Electronic
Equipment (WEEE). Consult your local waste
disposal authority for guidance on how properly to
recycle or dispose of this product.
Indicator Operational state
Flashing white Start-up in progress
Pulsing amber Ready for setup
Flashing amber Firmware update in progress
Pulsing white Audio pull in progress
Pulsing red Error - contact support
Solid red Error - contact support
Flashing red Factory reset in progress
Diagram 4
Form button illuminations
6