Armrests; Backrest Extension; Storage Box - Grammer PRIMO EL Plus Manual De Instrucciones

Seat functions and operation

Armrests * ***

The armrests can be folded up if required and
the height individually adjusted.
To adjust the armrests for height, separate
the round cap (see arrow) from the cover,
loosen the hexagon nut (size 13 mm) behind
it and adjust the armrests to the desired posi-
tion (5-steps) and tighten the nut again
(25Nm). Replace the cap onto the nut.

Backrest extension * ***

The backrest extension can be individually
adjusted for height by pulling it upwards over
the various increments up the end stop.
To remove the backrest extension, pull it up-
wards over the end stop.

Storage box * ***

The storage box is placed on the rear upper
side of the backrest.
To open the storage box, first pull the fixing
lug upwards (1.) and then, fold the cover of
the storage box backwards (2.).
* if fitted ** depending on model *** optional extra
GB
27