Metra 99-7627HG Instrucciones De Instalación página 9

Backup camera/AUX video settings:
• Camera Input
• Go to – SETTINGS> MISCELLANEOUS>CAMERA INPUT>
AFTERMARKET CAMERA
• The factory equipped back-up camera will continue to function
without any additional wiring or programming.
The interface is shipped in this mode.
• If the vehicle does not come equipped with a factory backup camera,
an aftermarket camera can be used. If an aftermarket camera is
installed, the settings will need to be changed to reflect this.
99-7627HG
Screen Operation
Note:
1. The aftermarket camera will be activated by the vehicle's reverse
signal, which is sent to the Axxess interface.
2. The camera input can also be used as an AUX video in. The blank button
on the far right of the radio trim panel with HVAC controls will toggle the
AUX video on or off.
Note: The AUX video will only work with the vehicle in PARK.
• Reverse Camera Lines
• Go to – SETTINGS>MISCELLANEOUS> REVERSE CAM LINES
• On or off
Note: By default, the back-up lines for the camera are set to off.
9