Publicidad
Idiomas disponibles
Idiomas disponibles
Installation (see also the manual of the charger used)
1.
Make a cut out using the outline drawings of Figure 1. For good visibility avoid installing the
panel in direct sunlight.
2.
Disconnect the external AC power. Then remove the DC fuses.
3.
Install the communication cable between the QRS232 input of the charger and the CC remote
panel. Refer to the installation manual of the charger.
4.
Place the DC fuses and connect the external power.
Safety regulations and measures
•
Install the product according to the stated instructions.
•
Only allow changes in your electrical system to be carried out by qualified electricians.
•
Connections and safety features must be executed according to the locally applicable
regulations.
•
Do not work on the charger and/or the electrical installation if it is still connected to an external
AC- or DC-source.
Guarantee terms
Mastervolt guarantees that the product has been built according to the legally applicable standards
and stipulations. If you fail to act in accordance with the regulations, instructions and stipulations of
this user's manual, damage can occur and/or the unit will not fulfill the specifications. This may mean
that the guarantee will become null and void.
The guarantee period is 2 years.
Liability
Mastervolt cannot be held liable for:
•
Damage resulting from the use of the product.
•
Possible errors in the included manual and the consequences of these.
•
Use that is inconsistent with the purpose of the product.
Table 1: Failure codes
LED's
Failure ind.+ 1 (BULK)
Failure ind.+ 2
Failure ind.+ 3 (ABS)
Failure ind.+ 4
Failure ind.+ 5 (FLOAT)
See chapter "Trouble shooting" of the manual of your charger to solve the problem.
ENGLISH
Meaning
Battery sense error
Charger temperature to high
Short circuit indication, charger will reduce the charge current to 25%
DC error, DC voltage too low or too high
Temperature sense error
Publicidad
