Hach AS950 Instalación Y Mantenimiento Básicos página 13

5.2.3 Install multiple bottles
When multiple bottles are installed, a distributor arm moves the sample tube over each bottle.
Sample collection automatically stops when the specified number of samples are collected.
1. Assemble the sample bottles as shown in
first bottle is near the bottle one indicator in the clockwise direction.
2. Put the bottle assembly in the sampler. For eight or more bottles, align the wires in the slots in the
bottom tray.
Figure 6 Multiple bottle installation
1 Retainer for 24 1-L poly
bottles
2 Retainer for 24 350-mL
glass bottles
3 Bottle one indicator
Figure 6. For eight or more bottles, make sure that the
4 Bottle tray for 8 to 24 bottles 7 Front of sampler
5 Slot for bottle tray
6 Floor of refrigerated
sampler
8 Removable tray (AWRS
only)
9 Insert (refrigerated sampler
only)
English 13