TiEmme 4HEAT Manual Del Usuario página 35

3. The 4HEATModule creates a temporary Wi-Fi to which you have to connect with the
Smartphone. To connect your Smartphone to the Wi-Fi you have to go to
Smartphone, where the Wi-Fi list is displayed and you have to select "4HEAT WI-FI". If your
Smartphone asks to stay under this Wi-Fi network, you have to accept it otherwise the
configuration cannot be done. This way the 4HEATModule will be connected to the app and the
associated account. How to activate "4HEAT WI-FI" with the various Modules:
• 4HEAT: Press button (e), the Blue(c) and Red(d) LEDs start blinking alternately;
• 4HEAT Lite: press the button (b) and the Blue (a) LED will start blinking;
• WiKEY: press button (c) for 3 seconds until the three leds start blinking, then press button (b)
and the Wi-Fi led (a) will start blinking;
• PinKEY: press button (b), the Wi-Fi (a) LED will start blinking.
4. Write a name for the device and enter a PIN of your choice. Each 4HEATModule device has its
own name and password.
5. Once the app and the 4HEATModule are connected you are asked at this stage to choose the home Wi-Fi to
which the 4HEATModule device should connect;
6. Make sure that the smartphone reconnects to the home Wi-Fi appliance and that the Leds are fixed and do go
on in the setup step.
Wi-Fi -> Settings of your
7 EN