TiEmme 4HEAT Manual Del Usuario página 48

• Alarm: you must have an alarm clock already enabled to use this Routine. If you don't have an alarm clock
enabled, ask Alexa to set an alarm, so the action will be performed every time the alarm sounds. If you have
more than one alarm clock set, you must change
end time that includes only and exclusively the alarm taken into account. Otherwise, the action will be
repeated for all the alarms set.
The third and final step after choosing one of the managements of
Routine.
To add an action you must access to
you can choose the actions to take.
The action the 4HEATModule device can take are two, divided into
actions or only one of the two, depending on your needs.
Ignition
In you can choose whether to switch the heating system on or off by enabling or disabling the
This will happen when the Routine is complete.
Set temperature,
In you can set the room thermostat temperature to a specific value, to choose manually, and it will
be set on the 4HeatModule device when the Routine is completed. It is possible to change the temperature unit from
Celsius Fahrenheit
to .
At any time
Smart House
and select the affected 4HEATModule device, once this is done,
TIME BETWEEN
and set
When this happens
is to add an action to end the
Ignition and Set temperature
by selecting a start and
. You can enable both
On Off
or flag.
20 EN