Graph View - TiEmme 4HEAT Manual Del Usuario

4. Updating changes: the button
button each time you make a change otherwise the set data will be lost.
5. Copying a time slot: by selecting the button
finished, press the confirmation button at the bottom of the page.
6. Time slot modification: by pressing on a tie slot, you can access the management menu,
time slots cannot be set below one hour of operation.

Graph View

This section displays the graphs of the values logged on the server by the 4HEATModule. Two types of views are
available:
1. Daily: the displayed values are represented during the day of operation of the heating system. You can display
the graphs of two time slots: 00:00/12:00 or 12:00/00:00. You can also choose to display the operating
states of the heating system (Ex. Off/Run Mode/Block etc.). The recorded data remain in the memory on a
weekly basis;
2. Period: graphical representation on a weekly basis of the system operating hours. The recorded data remain
in memory on a monthly basis.
synchronises the 24Heating with the device. Make sure to press this
you can copy time slots from one day to another. When
14 EN