Management - TiEmme 4HEAT Manual Del Usuario

• Settings Menu: allows you to customise the display of menu functions. Some functions may
not be available due to the configuration of the heating system. See "Menu";
• Settings Info: allows you to customise the display of system values in the info menu. See
"Information page";
• Remove Device: allows you to delete the currently selected device;
• GPS Coordinates: The local weather, which appears as Widget, can be set manually by
entering the desired latitude and longitude coordinates, or by using your Smartphone's GPS.
This menu is only displayed if you are on the same network as your device;
• Info: technical information regarding the product code of the control board and the firmware
version of the Module;
• Wi-Fi info: information about the internet network to which the 4HEATModule device is
connected. This information is only displayed if you are on the same network as the device.

Management

Operating State:
displays the system state and
errors if any
Main Thermostat:
it displays the system thermostat.
By pressing and holding
thermostat modification is enabled.
With keys
sliding your finger over the colour band
changes the temperature.
Widget:
they display information about the operation. You can decide which widgets to show on the main
screen via the menu
the key the
and or
.
System ON: press to switch it off
System OFF: press to switch it on
Synchronisation:
if flashing indicates that the application
and the module are exchanging
information. When finished, a feedback is
given on the result of the change.
Main Temperature
11 EN