Sennheiser MOMENTUM M3IETW Instrucciones Resumidas página 14

Using the earphones
14 | MOMENTUM True Wireless
If you pair the earphones with the ninth Bluetooth device, the saved
connection profile of the least used Bluetooth device will be over-
written. If you want to re-establish a connection with the overwritten
Bluetooth device, you have to pair the earphones again.
Pairing the earphones with a Bluetooth
device
1
max. 50 cm
3 4
ON
ON
1. Take both earbuds out of the charging case and insert them into
your ears (> 16). The distance between the earbuds and the Blue-
tooth device should not exceed 50 cm.
2. Simultaneously touch and hold the right and the left touch control
panel for 5 seconds until you hear the voice prompt "Pairing" and
a beep.
The LEDs of the earbuds flash blue and red. The earbuds are in
pairing mode.
3. Activate Bluetooth on your Bluetooth device.
4. Via the menu of your Bluetooth device, start the search for new
Bluetooth devices.
All active Bluetooth devices in the proximity of your smartphone
are displayed.
From the list of found Bluetooth devices, select "MOMENTUM
TW". If necessary, enter the default pin code "0000".
If pairing was successful, you hear the voice prompt "Pairing suc-
cessful" and the LEDs of the earbuds flash blue 3 times.
R
2
"Pairing"
Hold
5s
ON
MOMENTUM
TW
ON
paired +
connected
paired
"Pairing
successful"