Heat Protection Function - Silvercrest SKF 2800 B3 Instrucciones De Uso

Heat protection function

In a case of overheating, the heat protection function switches the appliance off.
This can happen if there is no, or not sufficient, oil or fat in the deep fat fryer or
when solid cooking fats are being melted in the appliance.
When using solid cooking fats, the control and heating element
off the heat that is generated quickly enough.
If the heat protection function has switched the appliance off, please proceed as
follows:
1) Allow the appliance to cool down.
2) Leave the oil or fat to cool (the fat should just be liquid).
3) Open the appliance lid
4) Remove the frying basket
5) Remove the operating/heating element
6) Place the operating/heating element
7) Carefully press the reset button
with a small pointed object.
The appliance can now be used again.
SKF 2800 B3
by pressing the lid release button
.
.
in a clean and dry location.
on the control and heating element
cannot give
.
GB │ IE │ 43 ■