Assembly; Trolley; Mirror Unit - Bosch RSCD 2100 Manual Original

en | 24 | RSCD 2100 | Assembly
5.

Assembly

5.1

Trolley

1. Place the trolley with the preassembled post and tilt
frame unit on a flat, level floor.
2. Install the handle.
3. Install the positioning foot behind the post.
4. Install two additional positioning feet on the side
facing the mirror.
5.2

Mirror unit

1. Remove mirror unit from packaging.
2. Place mirror unit on tilt frame and secure with
mounting nuts (M6).
3. Open carabiner on securing cable and attach to
eyebolt.
i
Tightening torque: 4 Nm max.
Abb. 6: Assembling the positioning feet, handle and mirror unit
|
1 690 386 085 2018-08-21
Abb. 7: Securing cable attached
1 Securing cable with carabiner
2 Eyebolt
Check whether the securing cable is at-
tached.
i
The securing cable must be detached for measuring
positions less than 500 mm to prevent overstret-
ching. See also sec. 7.1.2.
Robert Bosch GmbH