22 9.5 Spare And Wearing Parts; Disposal And Scrapping - Bosch RSCD 2100 Manual Original

en | 30 | RSCD 2100 | Maintenance
9.4 Cleaning
i
Use only soft cloths and neutral cleaning agents to
clean the mirror unit, cam, frame and post.
i
Do not use abrasive cleaning agents and coarse
workshop cloths!
9.5 Spare and wearing parts
i
The mirror unit can be exchanged without any loss
in measurement accuracy.
Designation
Positioning foot
Wheel with retaining ring (4 x)
Mirror unit with spirit level (adjusted)
Alignment unit with laser and battery (ad-
justed)
Springs (4 x)
Securing cable
|
1 690 386 085 2018-08-21
9.6
1. Disconnect the RSCD 2100 from the mains and de-
tach the power cord.
2. Dismantle the RSCD 2100 and sort out and dispose
of the different materials in accordance with the
applicable regulations.
Only for EC countries:
Order number
1 693 740 525
1 690 381 415
1 690 381 412
1 690 381 407
1 690 381 414
1 690 382 427

Disposal and scrapping

RSCD 2100, accessories and packaging
should be sorted for environmental-friendly
recycling.
¶
Do not dispose RSCD 2100 into household
waste.
The RSCD 2100 is subject to the European
directive 2012/19/EC (WEEE).
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
¶
Make use of the local return and collection
systems for disposal.
¶
Proper disposal of RSCD 2100 prevents
environmental pollution and possible health
hazards.
Robert Bosch GmbH