Installing The Appliance; Ambient Temperature; Moving Your Appliance - Saivod VS618B Manual Del Usuario

6. Temperature setting buttons
BEFORE INSTALLING THE APPLIANCE
Before connecting your appliance to the power supply, check that the voltage stated on the
rating label of your appliance corresponds to the voltage in your home. A different voltage
could damage the appliance.
The plug is the only way to unplug the appliance and should therefore be accessible at all
times. To turn off main power to the appliance, detach the plug from the outlet. Do not
immerse the appliance, the power cord or the plug in water or other liquid.
The appliance must be grounded. The manufacturer is not responsible for damages that may
occur as a result of usage without grounding.

INSTALLING THE APPLIANCE

This appliance is designed to be freestanding only.
Install the appliance in a dry, well ventilated room. The installation location should neither be
exposed to direct sunlight nor near a heat source, e.g. a cooker, radiator, etc.
To ensure adequate ventilation for the appliance, allow a minimum of 10 cm of airspace on
each side of the cabinet.
For uneven surfaces, adjust the four feet.

AMBIENT TEMPERATURE

This appliance is designed to operate in ambient temperature between 10°C and 32°C.If these
temperatures are exceeded, i.e. colder or warmer, the appliance will not operate correctly.

MOVING YOUR APPLIANCE

• Make sure that the appliance is unplugged from the mains socket. Remove all cans, bottles
and shelves to avoid any shock.
• Always move the appliance vertically.
• After moving, wait for 30 minutes before plugging in the appliance.
BEFORE FIRST USE
• Remove all packaging.
• Clean the inside of the appliance with warm water and a little liquid detergent to remove
manufacturing and transportation dust.
OPERATION
Ensure that the appliance is placed on a flat stable surface.
Plug the appliance into the mains socket. The display will show the actual internal temperature.
Allow the appliance to cool down for 2-3 hours before placing cans/bottles in the appliance.
SELECTING THE TEMPERATURE
The temperature can be set from 8°C to 18°C (46°F to 65°F).
1. Repeatedly press
Wine cooler.indd 19
/
/ toselect the required temperature.
GB
19
2018/8/14 15:03:32