The appliance contains refrigerant and gases in the
insulation.
Refrigerant and blowing gases must be disposed of
professionally. Ensure that tubing of the refrigerant
circuit is not damaged prior to proper disposal.
OVERVIEW
1. Interior LED lights
2. Wooden shelves
3. Wire shelf
4. Light button
5.Temperature setting display
6.
/
Temperature setting buttons
BEFORE INSTALLING THE APPLIANCE
Before connecting your appliance to the power supply, check that the voltage stated on the
rating label of your appliance corresponds to the voltage in your home. A different voltage
could damage the appliance.
The plug is the only way to unplug the appliance and should therefore be accessible at all
times. To turn off main power to the appliance, detach the plug from the outlet. Do not
immerse the appliance, the power cord or the plug in water or other liquid.
The appliance must be grounded. The manufacturer is not responsible for damages that may
occur as a result of usage without grounding.
INSTALLING THE APPLIANCE
This appliance is designed to be free standing only.
Install the appliance in a dry, well ventilated room. The installation location should neither be
exposed to direct sunlight nor near a heat source, e.g. a cooker, radiator, etc.
24
VSC3818D.indd 24
2018/8/14 14:28:13