ratiotec rapidcount T 100 Manejo página 8

rapidcount T 200
Mode
Count: Describes the item counting mode of the banknote counter. The authenticity check on the
banknotes is not activated.
Check: During item counting, the checking of format, UV, infrared and magnetic features is also
activated.
REPORT
When this button is pressed after the counting procedure, the display shows the count result in a clear
form. Repressing the button or starting a new counting procedure brings back the standard display
mode.
rapidcount T 225
Mode
Count: Describes the item counting mode of the banknote counter. The checking of UV features is not
activated. The number of banknotes is counted.
Sort: This mode describes the counting of sorted banknotes, e.g. the counting of a stack of 10 Euro
banknotes. The value and the number of inserted banknotes are determined. The first banknote fed
in (the lowest banknote of the placed stack!) is used as a reference value. If there are foreign bank-
notes in the stack, i.e. notes that do not correspond to the reference value, this will be signalled by
an error message and the device will stop immediately. The foreign banknote can be removed from
the banknote compartment and you can continue the counting procedure using the START button.
Mix: Counting of unsorted banknotes.
REPORT
When this button is pressed after the counting procedure, the display shows the number of all bank-
notes counted, as well as the total in a clear form. Repressing the button or starting a new counting
procedure brings back the standard display mode.
Note: If a document printer is connected to the printer connection of the banknote
counter, a document can also be printed in parallel to the display if the button is held down for an
extended time.
rapidcount T 275
Mode
Count: Describes the item counting mode of the banknote counter. The authenticity check is not
activated. The number of banknotes is counted.
Sort: This mode describes the counting of sorted banknotes, e.g. the counting of a stack of 10 Euro
banknotes. The value and the number of inserted banknotes are determined. The first banknote fed
in (the lowest banknote of the placed stack!) is used as a reference value. If there are foreign bank-
notes in the stack, i.e. notes that do not correspond to the reference value, this will be signalled by an
error message and the device will stop immediately. The foreign banknote can be removed from the
banknote compartment and you can continue the counting procedure using the START button. During
counting, a check on colours, as well as format, UV, infrared and magnetic features, is also activated.
Mix: Counting of unsorted banknotes. During counting, the check on colours, as well as format, UV,
infrared and magnetic features, is also activated.
REPORT
When this button is pressed after the counting procedure, the display shows the number of all bank-
notes counted, as well as the total in a clear form. Repressing the button or starting a new counting
procedure brings back the standard display mode.
Note: If a document printer is connected to the printer connection of the banknote
counter, a document can also be printed in parallel to the display if the button is held down for an
extended time.
8