Preparing Latte Macchiato - Silvercrest SEMM 1470 A1 Instrucciones De Uso

"Small" cappuccino
–
Press and hold the "Small" cappuccino button
until the pump starts to work. Milk froth comes out of the milk nozzle.
–
Once the desired quantity of milk froth has been produced, stop milk
froth production by pressing the "Small" cappuccino button
again. You can set a duration of 5–40 seconds.
–
Following the milk froth production, the espresso comes out of the
espresso outlet
–
The next time you prepare a cappuccino using the "Small " cappuccino
button
output.
"Large" cappuccino
–
Press and hold the "Large" cappuccino button
seconds until the pump starts to work. Milk froth comes out of the milk
nozzle.
–
Once the desired quantity of milk froth has been produced, stop milk
froth production by pressing the "Large" cappuccino button
again. You can set a duration of 5–70 seconds.
–
Following the milk froth production, the espresso comes out of the
espresso outlet
–
The next time you prepare a cappuccino using the "Large" cappuccino
button
output.

Preparing latte macchiato

1) Ensure that there is enough water in the water tank
necessary.
2) Ensure that there is enough milk in the milk tank
3) Select whether you want prepare a latte macchiato with a single or double
espresso and fit the corresponding espresso sieve
4) Add the espresso powder to the espresso sieve
holder
5) Place a suitable cup on the drip grille
6) Set the milk nozzle
SEMM 1470 A1
to prepare the cappuccino.
the newly programmed duration will be used for milk
to prepare the cappuccino.
the newly programmed duration will be used for milk
.
so that it is pointing into the cup.
for about 3 seconds
for about 3
. Add more water if
. Add more milk if necessary.
in the sieve holder
and fit the sieve
.
GB │ IE
.
│ 49 ■